Description

AC100+ GOLD® Vinylester Injection Adhesive Anchoring System

9.5 fl. oz.

The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.

Available Sizes: 1 piece, 12 piece

Features

Designed for use with threaded rod and reinforcing bar hardware elements
Consistent performance in low and high strength concrete
Evaluated and recognized for freeze/thaw performance (interior and exterior applications)
Evaluated and recognized for a range of embedments
Versatile low odor formula with optimized cure time
Evaluated and recognized for long term and short term loading (see performance tables)
Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
Cartridge design allows for multiple uses using extra mixing nozzles
Universal product for concrete and masonry (hollow and solid base materials)

General Application & Uses

Applications

Bonding threaded rod and reinforcing bar into hardened concrete and masonry
Evaluated for use in dry and water-saturated concrete (including water filled holes)
Suitable to resist loads in cracked or uncracked concrete base materials
Adhesive system can be installed in a wide range of base material temperatures; qualified for structural applications in concrete and masonry as low as 14ºF (-10ºC)
Qualified for seismic (earthquake) and wind loading

Approvals & Listings

Approvals

International Code Council, Evaluation Service (ICC-ES) ESR-2582 for concrete
International Code Council, Evaluation Service (ICC-ES) ESR-3200 for masonry
International Code Council, Evaluation Service (ICC-ES) ESR-4105 for Unreinforced Masonry (URM)
Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
Tested in accordance with ASTM E488 / ACI 355.4 and ICC-ES AC308 for use in structural concrete with ACI 318-14 Chapter 17 and ACI 318-11/08 Appendix D
Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects; meets requirements for materials in contact with potable water and water treatment
Conforms to requirements of ASTM C 881 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes A & B (meets Type III with exception of elongation)
Department of Transportation listings – see www.DEWALT.com or contact transportation agency